How do i change my swingarm bearings?

i am trying to change the swing arm bearing on my cr80. but i cant seem to get the axle out it wont even budge any suggestions



thanksHow do i change my swingarm bearings?
The pivot bolt is rusted to the spacers.

Get some penetrating oil from an auto parts store.

Remove the gas tank and drain the carb.

Lay the bike on it's side (nut side of bolt up).

Spray into the pivot bolt and let it seep down the bolt - let it sit over night.

Install the nut on the bolt (leave it loose a couple of threads).

Try to hit the bolt out with a hammer - if the bolt moves, back the nut off a couple more threads and repeat.

Also -

Grab one of the spacers with a pair of vice grips - try to turn the bolt to break it loose of the spacer - repeat with the other spacer.

Also -

Heat a spacer with a propane torch - grab it with vice grips and turn the bolt to break it free of the spacer - repeat with other spacer.How do i change my swingarm bearings?
type into search box



how to replace swingarm bearings motorcycle had about a hundred ways to do it you can find most repairs this way just type how to replace name of part name of car truck or bike and some times if you add video to end of that you get a video
Hi, if you want to get more information about it, go to http://car-engine.synthasite.com/?q=swingarm