Sunday, November 14, 2010

How do i change the front wheel bearings on my yamaha yz 125 2001?

i want to chane the front wheel bearings on my yamaha yz 125 how do you do this?How do i change the front wheel bearings on my yamaha yz 125 2001?
Ok so click on the link below, as you read this next part.



First you obviously need to take the wheel off. Pretty simple as long as you have a good hammer, long and strong flat head screw driver, and the other tools to undo the bolt.

#11 is the first peice you will take apart. Your gonna need the hammer and screw driver to get that out because its should be in there pretty tight.



Look at #12 and 13. Again just push or ';knock'; these to peice out. Sometime they will just slip out pretty easily but a lot of the time they can be a pain to get out.



Now still looking at the diagram, #'s 4 and 2 are what you will be replacing. Once again, using your handy flat head screw driver and hammer, you just have to pound those things out.

If they are burned up or slightly damaged they will be really hard to get out.



That is about it though. Just use the diagram and it should help you out a lot as to what parts will go where.

No comments:

Post a Comment